PLEASE SCROLL DOWN FOR ALL HOSES, CONNECTORS,
REDUCERS AND RELATED ITEMS

90º BENDS

Woven, moulded-in reinforcement. Nice, tight, free-flowing hoses in 5 sizes. Cut to length - even on the bend to produce any angle up to 90º.

25mm (1”) Arm length 150mm (6”)
32mm (1¼“) Arm length 200mm (8”)
38mm (1½“) Arm length 300mm (12“)
45mm (1¾”) Arm length 300mm (12”)
50mm (2“) Arm length 300mm (12“)
60mm (2 3/8“) Arm length 300mm (12“)

25mm 90º Hose

Tough reinforced moulded rubber. Very strong. 19mm internal to 15mm internal. Overall dimensions 125mm x 125mm. Maximum o/d 38mm.

HEATER HOSE

Strong & flexible allowing considerable bend radius. Textile woven reinforcing. Will stretch to 4mm larger than its bore.

12mm (½”)
15mm (⅝”)
19mm (3/4") (not Gates)

STRAIGHT HOSE

Woven reinforcement. Strong & flexible. High temperature (up to 135ºC) and burst resistance. Supplied in 1 Metre lengths.

25mm (1”)
32mm (1¼”)
38mm (1½”)
45mm(1¾”)
50mm (2”)
57mm (21/4”)

VULCOFLEX FLEXIBLE HOSE

Steel spiral reinforcement. Strong & ultra flexible. Will not collapse even on tightest turns. Bore and length listed below:

28mm x 225mm
32mm x 275mm
32mm x 400mm
32mm x 508mm
38mm x 375mm
38mm x 450mm
50mm x 432mm

ALUMINIUM AIR DUCT

Convoluted spiral wound ducting for heater vents and air box inlets. Very flexible whilst retaining its shape when formed. Compressed ½ Mtr lengths.

40mm (1 9/16”)
50mm (2”)

DUCT HOSE

Very flexible. Easily cut. Helical wire reinforcement. 63mm ( 2 ½”) inside diameter. Fits our face and demist vents. Supplied in 1.8 Mtr (2 yard) lengths.
ALSO AVAILABLE 50mm (2").

HOSE & PIPE CUTTER

No more ragged, untidy radiator hoses. Make clean, neat, square cuts on all your rubber & plastic pipes & hoses. Ratchet action. Will cut up to 50mm rubber hose.

FUEL HOSE

Resists heat, oil ozone & weathering. Spiral textile reinforcement. Working pressure up to 140 psi. Suitable for carburettor and most fuel injected engines.

3.2mm (1/8”)
4mm
5mm (3/16”)
6mm (1/4”)
8mm (5/16”)
10mm (3/8”)
12mm (1/2")

8mm COPPER PIPE

FUEL HOSE TEXTILE COVERED

Resists all petrols and diesel. Woven textile reinforcement resistant to heat, oil, ozone and weathering. For that classic look on carburated engines. Maximum pressure 85 psi. Temperature range -35ºC to +100ºC

5mm (3/16”)
6mm (1/4”)
8mm (5/16”)

HOSE ID REDUCERS

To reduce the inside diameter of your hose for a perfect fit on those non-standard installations. NEW SIZES.

38mm to 32mm
45mm to 38mm
50mm to 45mm
57mm to 50mm
63mm to 57mm
75mm to 63mm

IN-LINE REDUCERS, CONNECTORS & 'T's

Connect almost any inlet/outlet configuration with these tough glass reinforced nylon connectors. Suitable for oil, water or fuel.

HOSE REDUCER CONNECTOR
6mm to 5mm
10mm to 8mm
12mm to 10mm
15mm to 12mm
19mm to 15mm
25mm to 19mm

EQUAL ‘T’s
6mm
8mm
10mm
12mm
15mm

REDUCING ‘T’
15mm (2 legs) 10mm (1 leg)

ELBOWS
6 mm
8mm
10mm
12mm
15mm
19mm
25mm

FLEXIBLE FUEL FILL HOSE
Corrugated flexible hose with wire reinforcement for connecting your fuel filler to your fuel tank. Easily cut with knife & wire cutters. Resistant to leaded, unleaded petrol & diesel. 50mm ID Supplied boxed in a 3ft length or 1' 6" length.

REDUCING HOSE

Tough reinforced moulded rubber. 19mm internal to 15mm internal. Overall length 100mm. Maximum o/d 30mm.

If you want the very best flexible hose - here it is. Reaches the parts other hoses can't reach. Smooth bore for unrestricted flow. Embedded spiral wire in moulded rubberised fabric. Will bend to very tight radii without collapsing. Resistant to heat grease and oil. Supplied in lengths of 1.52 Metres (5 ft). Made in USA. We used this on our first car 16 years ago and it's still working perfectly. 'Fraid it ain't cheap though.

3 Sizes:
25mm (1")
32mm (1 ¼")
38mm (1 ½")